V200pro Product Details

 

V200 Pro

Automotive Power Circuit Probe Tester Breaker Finder Tools 12/24V Electrical Open Short Diagnostic Tools

 


Power Circuit Tester
Comprehensive Power Circuit Tester
Switch to Mode I, activated power circuit probe Tester which supports 4 working modes: AC/DC Voltage, Resistance and Diode. The electrical probe tester allows users to check 12V-24V electrical systems instantly.

V200 Pro Circuit Tester
Locating Breaker Point Efficiently
Switch the V200 Pro All-In-One Circuit Tester Kit to Mode II, you will be able to use the breaker finder which can easily locate the circuit breaker point, open connections, broken wires, current leaks with tone change, even trace wire/cable without damaging the insulation.

 

Overload Protection
Overload Protection To Protect Car Electronics
This automotive electrical tool comes with short circuit protection. Whenever it gets overloaded, it just gonna shut down and restart, which is a safe measure to protect the device and car electronics.

20ft Extension Cord
20ft Extension Cord To Work Anywhere Around The Vehicle
V200 Pro circuit tester automotive tool comes with 20 feet long cord plus 20 feet extension cord. Combining the feature that it can be powered by the cigarette lighter, and alligator clip for convenient ground connection, you can test electrical circuit system anywhere around the vehicle.
Q&A
The V200 Pro covers all circuit tests: circuit breaker test; short circuit test; trace line; AC/DC voltage test; diode test; resistance test; polarity test; continuity test; ground test; activation component; signal circuit test; relay, fuse, trailer light test.
We provide 3 years warranty and lifetime after-sales service. If your device is defective or malfunctioning, please contact us directly at service@vdiagtool.com and we can send you a new one for replacement within 24 hours.
Switching to Mode I, you have just activated the Power Circuit Probe Tester, which can be powered by connecting to the cigarette lighter/vehicle battery, no external battery required! Mode II The Circuit Breaker Tester is powered by 1 9V battery!
Yes. The Mode II Circuit Breaker Tester is powered by 1 9V battery. When the tool is not needed, check the transmitter section and put it in the OFF position to avoid draining the 9V battery.
VDIAGTOOL V200 Pro Automotive Circuit Power Probe Tester comes with its own 20FT cable and 20FT extension cable, making it easy for you to access and test anywhere in the vehicle.
It performs various functions such as voltage and polarity testing, resistance testing, diode testing, continuity testing, signal circuit testing, checking for poor ground contacts, and tracing and locating short circuits.
Of course, it has been certified by external testing.

Other test tools can only detect voltage, while the V200pro tool can not only detect voltage, but also perform resistance, diode testing and short circuit protection, and can work in a wider voltage range.

MIKE

The V200pro is easy to operate and has a long cable, which makes it easy to test around the car, which greatly reduces my workload.

JACK

I have been using this product for a long time. V200pro has shown that its anti-overload protection function is superior to similar products, which can prevent equipment damage and extend its service life.

BOOBY

When I bought the V200pro, I was attracted by its lifetime after-sales support. Whenever I had a problem and contacted customer service, they responded to me very quickly and told me what went wrong.

Joep