36 Special functions outside diagnosis(3)
Vdiagtool VD70 and Vdiagtool VD70S are automotive diagnostic tools.
Integrating these two products into the suspension system function allows car owners or technicians to diagnose and maintain the system better, find problems quickly, and repair them. The following is an introduction to how to combine these two diagnostic tools with the suspension system function.
Summary of Vdiagtool VD70 & VD70S features for suspension systems:
1.Real-time Data Monitoring: Continuously monitors suspension sensor data to detect system status.
2.Fault Code Reading and Clearing: Reads and clears fault codes to ensure proper system function.
3.System Reset and Calibration: Resets and calibrates after repairs to restore normal operation.
4.Diagnostic of Dynamic Control Systems: Detects faults in dynamic systems (ESP, TCS) to ensure stability.
5.Performance Testing: Monitors shock absorber response and pressure to ensure optimal suspension performance.
Applicable models and scenarios:
- Applicable models: Vdiagtool VD70 and VD70S are suitable for most modern models, especially those equipped with electronically controlled suspension systems (such as air suspension, adaptive suspension, etc.).
- Repair scenarios: When repairing or maintaining a vehicle, especially when replacing suspension parts (such as shock absorbers, suspension airbags) or adjusting the suspension system, using these tools for diagnosis and calibration can effectively improve repair efficiency and accuracy.
Window initialization refers to the need to reset or calibrate the electronic control system of the car window to ensure that the window can rise and fall normally and respond after the car's electronic control window system fails, reconnects the power or replaces the motor, window lifter and other parts.
Window initialization usually involves resetting the starting position of the window so that the window can accurately identify the position of the switch (such as fully closed, fully open, stopped position, etc.). This step is very important to ensure the smooth operation of the window system, especially when encountering electronic control window failure.
Window initialization using Vdiagtool VD70 or VD70S
Diagnostic tools such as Vdiagtool VD70 and VD70S can connect to the vehicle's onboard computer system through the vehicle's OBD-II interface to help more efficiently complete window initialization or related electronic control system reset. With this type of tool, you can do the following：
1.Read the electric window system fault code: If the window fails, the first thing you can do is use Vdiagtool VD70 or VD70S to read the window system fault code and diagnose possible electronic control problems.
2.Reset the window system: Some models may allow the window system to be reset through the OBD-II interface to initialize the system directly.
3.Perform an electric window system calibration: For electric windows equipped with automatic up/down, automatic reverse functions, etc., Vdiagtool VD70 and VD70S can help calibrate the system to ensure that the window can sense and operate accurately.
Seat matching refers to the matching of the electronic control system with the on-board computer when replacing or reconfiguring the car seat to ensure that the various functions of the seat (such as electric adjustment, seat heating, seat memory, etc.) can work properly. This process usually involves programming, initializing or resetting the seat's electronic control module to make the new seat compatible with the car's electronic control system.
Seat matching using Vdiagtool VD70 or VD70S:
- Connect to OBD-II port: First, connect Vdiagtool VD70 or VD70S to the vehicle's OBD-II port and start the diagnostic tool.
- Select the correct vehicle model and seat system: In the diagnostic tool interface, select your vehicle brand and model, and then enter the seat system programming or matching function.
- Read and clear fault codes: Use the tool to scan the seat system fault codes to see if there are any error codes related to the seat power adjustment, seat heating or seat memory function. If there are, the diagnostic tool will display the fault code and provide repair suggestions.
- Perform seat matching procedures: Follow the prompts of the diagnostic tool to match or program the seat module. This process is usually performed automatically, and the tool will require you to perform some necessary operations (such as adjusting the seat to a specific position) to complete the matching.
- Test seat functions: After matching is completed, use the diagnostic tool to test various seat functions (such as adjustment, heating, memory, etc.) to ensure that the seat functions are working properly.
- Save and disconnect the tool: After ensuring that all functions of the seat have returned to normal, save the settings and disconnect Vdiagtool VD70 or VD70S
Seat matching is a key step to ensure the normal operation of the electric seat system (including seat adjustment, seat heating, memory seat and other functions). When replacing seats or seat modules, seat matching with professional diagnostic tools such as Vdiagtool VD70 and VD70S can ensure the smooth restoration and normal use of all seat functions. If the seat function fails, timely diagnosis and matching with diagnostic tools is an effective way to solve the problem.
Headlight adjustment refers to adjusting the illumination angle and brightness of the headlights through the vehicle's electronic control system or manual control to ensure the best field of vision when driving at night and avoid dazzling other road users (such as vehicles driving in the opposite direction). Headlight adjustment is usually used to adjust the height, high and low beams, and angles of the headlights to ensure a wide illumination range and comply with traffic regulations.
Adjusting the headlights via the diagnostic tool
Using Vdiagtool VD70 or VD70S: Some high-end models are equipped with the function of automatically adjusting the headlights. Using diagnostic tools such as Vdiagtool VD70 or VD70S, you can adjust and calibrate the headlights to ensure that the angle and brightness of the headlights meet the needs of the vehicle.
Adjustment steps:
1.Connect the diagnostic tool: Connect Vdiagtool VD70 or VD70S to the vehicle's OBD-II interface and start the diagnostic tool.
2.Select the headlight system: In the diagnostic tool, select the "Headlight" or "Lighting System" section of the vehicle.
3.Perform the headlight calibration procedure: Follow the system prompts to automatically calibrate the headlights.
4.The tool will automatically adjust the height and angle of the headlights to ensure that they meet the vehicle's setting requirements.
5.Confirm the adjustment effect: After completing the adjustment, check the headlight's illumination angle to ensure that it is working properly.
